Comtech-ef-data MIDAS Version 4.X NMS Configuration Manuel d'utilisateur Page 136
- Page / 150
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MIDAS 4.X NMS Configuration, Rev. 6
A-4 Frequency Translations
Figure A-3. MIDAS Ku-Band Transponder Setup Example
Note: Refer to Section 2, Initial Setup Procedures for descriptions of additional System
Setup parameters.
After System Setup parameters are set, clicking OK will cause the Controller to reboot with
the new parameters. Allow the Controller to reboot. The Controller will be in an exception
state because the Space Segment and Control Channel has yet to be defined. Connect to the
Controller with the NMS and select Bandwidth Administrator to set up the Space Segment.
Space Segment
Setup
Ensure 2.4 MHz of bandwidth and the Ku RX center frequency is 11.7325 GHz, define the
beginning and end of your space segment in IF by determining where it lies on the trans-
ponder with the following formula:
Transponder RX Center – RX Center = Offset below Transponder RX Center
or
RX Center - Transponder RX Center = Offset above Transponder RX Center
- Revision 6 1
- MIDAS Version: 4.X 3
- Network Customer Support 4
- Preface, iii 5
- Preface, iv 6
- Preface, v 7
- Preface, vi 8
- Table of Contents 9
- Preface, viii 10
- IMPORTANT 11
- Concerning this Manual 12
- Disclaimer 12
- NMS Components 15
- Standard Controller 17
- Server Features 17
- Options 17
- Controller Server 18
- Redundancy 18
- Node Components 19
- 2. Click on a menu option 23
- 3. Press the Enter key 23
- ♦ System Administration 29
- Setup and Operation 2–3 31
- 2–4 Setup and Operation 32
- Satellite/System 33
- Parameters 33
- 2–6 Setup and Operation 34
- Transponder 35
- 2–8 Setup and Operation 36
- Setup and Operation 2–9 37
- Bandwidth Pool 38
- Major Bandwidth 39
- Pool Functions 39
- Adding Bandwidth 39
- Private Pools 40
- Deleting Bandwidth 41
- 2–14 Setup and Operation 42
- Toolbar 43
- height 44
- Grid Properties 46
- View Properties 47
- Legend Properties 48
- 2–22 Setup and Operation 50
- Placement Selection 52
- Outbound 53
- Inbound Parameters 53
- Options Parameters 54
- Aloha Parameters 55
- 2–30 Setup and Operation 58
- Node Alignment 60
- 2–34 Setup and Operation 62
- Setting Power 63
- Levels for Traffic 63
- Channels 63
- 2–36 Setup and Operation 64
- 2–38 Setup and Operation 66
- 2–40 Setup and Operation 68
- 2–42 Setup and Operation 70
- 2–44 Setup and Operation 72
- 2–46 Setup and Operation 74
- 2–48 Setup and Operation 76
- User Information 78
- Group Administration 79
- 2–52 Setup and Operation 80
- Add Group 81
- Edit User Privilege 82
- 2–56 Setup and Operation 84
- 2–58 Setup and Operation 86
- 2–60 Setup and Operation 88
- 2–62 Setup and Operation 90
- 2–64 Setup and Operation 92
- Point-to-Multipoint 94
- Data Details 94
- Delete Hunt Groups 95
- 2–68 Setup and Operation 96
- Available Channels 98
- Assigned 99
- 2–72 Setup and Operation 100
- Hunt Groups 102
- Ascending or Descending 102
- Reports Menu 3–1 103
- 3–2 Reports Menu 104
- Reports Menu 3–3 105
- 3–4 Reports Menu 106
- Reports Menu 3–5 107
- 3–6 Reports Menu 108
- Reports Menu 3–7 109
- 3–8 Reports Menu 110
- Reports Menu 3–9 111
- 3–10 Reports Menu 112
- Reports Menu 3–11 113
- 3–12 Reports Menu 114
- Reports Menu 3–13 115
- 3–14 Reports Menu 116
- 4–2 Maintenance Menu 118
- Maintenance Menu 4–3 119
- Specify the 120
- Export Path 120
- Maintenance Menu 4–5 121
- 4–6 Maintenance Menu 122
- Maintenance Menu 4–7 123
- 4–8 Maintenance Menu 124
- Maintenance Menu 4–9 125
- 4–10 Maintenance Menu 126
- Maintenance Menu 4–11 127
- 4–12 Maintenance Menu 128
- Maintenance Menu 4–13 129
- 4–14 Maintenance Menu 130
- Maintenance Menu 4–15 131
- 4–16 Maintenance Menu 132
- Ku-Band Frequency 133
- Translations 133
- Conversion Formulas 134
- An Example Ku-Band 135
- Carrier 135
- System Setup 135
- Space Segment 136
- Control Channel 137
- A-6 Frequency Translations 138
- Frequency Translation A-7 139
- IF to Ku-Band 140
- Frequency Inversion 140
- 70 MHz IF 141
- A-10 Frequency Translations 142
- Frequency Translation A-11 143
- A-12 Frequency Translations 144
- Frequency Translation A-15 147
- A-16 Frequency Translations 148
- Frequency Translation A-17 149
- 480 • 333 • 2200 PHONE 150
- 480 • 333 • 2161 150
Produits connexes et manuels pour Équipement Comtech-ef-data MIDAS Version 4.X NMS Configuration
(30 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.092 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels