Comtech EF Data CDM-710G Spécifications télécharger pdf (Page 169)

CDM-710 Broadcast Satellite Modem Revision 11

CDI-70 1000 Base-T Gigabit Ethernet (GigE) Interface Module MN/CDM710.IOM

10–7

10.5.1 CDI-70 GigE Interface Firmware Upgrade Procedure

Step

Procedure

1 Identify the CDI-70 firmware product required for download:

• From the CDM-710 front panel: SELECT: UTILÆ FirmwareÆ InfoÆ Image#

(Image1 or Image2)Æ InterfacesÆ GBEI

• From the Serial Console port: View the CDI-70 information by selecting Operations,

then selecting Maintenance/Unit Information.

• From Telnet via the 10/100 Ethernet Traffic port: View the CDI-70 information by

selecting Operations, then selecting Maintenance/ Unit Information.

• From HTTP Web Server Inteface via the 10/100 Ethernet Traffic port: View the CDI-70

information by selecting the MAINT tab, then selecting the Unit Info hyperlink.

Create a temporary folder (directory) on an external PC:

• For Windows Explorer: Select File > New > Folder to create a new folder, then rename it from

“New Folder” to "temp" or another convenient, unused name. Assuming "temp" works, a

"c:\temp" folder should now be created.

Note: The drive letter c: is used in this example. Any valid writable drive letter can be used.

• For Windows Command-line: Click [Start] on the Windows taskbar, then click the

“Run...” icon (or, depending on Windows OS versions prior to Windows 95, click the “MS-

DOS Prompt” icon from the Main Menu). Then, to open a Command-line window…

o For Windows 95 or Windows 98 – Type “command”.

o For any Windows OS versions later

than Windows 98 – Type “cmd” or

“command”.

Alternately, from [Start], select All Programs > Accessories > Command Prompt.

At the Command-line prompt (c:\>), type “mkdir temp” or “md temp” (without quotes – mkdir

and md stand for make directory). This is the same as creating a new folder using Windows

Explorer. There should now be a "c:\temp" subdirectory created (where c: is the drive letter used in

this example).

Download the correct firmware file to this temporary folder. As shown in Figure 10-3:

a) Go online to: www.comtechefdata.com

;

b) From the Home page menu bar, click the Support tab;

c) Click the Software Downloads drop-down or hyperlink from the Support page;

d) Click the Download Flash and Software Update Files icon;

e) Click the (Select a Product Line:) Satellite Modems hyperlink provided on the Flash and

Software Update Files page;

f) Select the CDM-710 product hyperlink from the Comtech Brand column;

g) Select the desired CDI-70 firmware version hyperlink (the firmware number for the

CDM-710’s CDI-70 Gigabit Ethernet Interface module is FW12547).

Extract the files to the temporary folder on the PC. A minimum of four files should be extracted:

• FW12547x.bin, where "x" denotes the revision letter for the bulk image file.

• ReleaseNotes_FW12547_vxxx.pdf – Where "xxx" is the complete version number;

• CReflashVx.zip – The archive file containing the executable used to upload firmware to the

CDI-70.

• CReflash_readme_GBEI1.TXT– Installation notes for the CReflash app.

To confirm that the files have been extracted to the specified temporary folder on the PC, using

Command-line, type cd c:\temp to change to the temporary directory created in Step 2, then use the

dir command to list the files extracted from the downloaded archive file.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 237 238

Comtech EF Data CDM-710G Spécifications Page 169

Commentaires sur ces manuels

Comtech EF Data CDM-710G Spécifications Page 169

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Comtech EF Data CDM-710G