
Specifications – SDM-9220, SDM-9230 and SDM-8400
Capacity
channels
channels per unit
or 120 T1/E1 CAS/PRI digital
Up to 3 serial data ports, or 1
serial and 4 T1 or E1 data
interfaces (up to 124 logical
Up to 3 serial data ports, or 1
serial and 6 T1 or E1 data
interfaces (up to 124 logical
Available in 4 or 8 serial port
extensions
Link Port
Speed
• With data compression
disabled: 8 Mbps/1 port,
2 Mbps/other ports
• With data compression
enabled: Up to 2 Mbps
*Maximum speed is protocol
• With data compression
disabled: 8 Mbps/1 port,
2 Mbps/other ports
• With data compression
enabled: Up to 4 Mbps
*Maximum speed is protocol
• With data compression
disabled: 8 Mbps/1 port,
2 Mbps/other ports
• With data compression
enabled: Up to 2 Mbps
*Maximum speed is protocol
license required)
T1/E1 full or fractional, WAN
over AAL5 UBR using up to
32 PVCs, RFC1483
Multiprotocol Encapsulation
over AAL5, RFC2364 PPP
over AAL5, FRF.8 Service
Interworking, AAL0
Physical
• Auto-sensing power 100-
240 VAC, 50/60 Hz, 65 W
maximum
• -48 VDC
• 1 serial port (user or link),
DTE or DCE, HD26F
connector, compatible
with RS- 232/V.24, V.35,
X.21/V.11, RS-449/V.36,
RS-530, internal/external
clocking
• 2X 10/100Base-T
Ethernet (RJ-45
connectors)
• 1 DSP connector per unit
• 2 expansion slots
• Auto-sensing power 100-
240 VAC, 50/60 Hz, 65
W maximum
• -48 VDC
• 1 serial port (user or
link), DTE or DCE,
HD26F connector,
compatible with RS-
232/V.24, V.35,
X.21/V.11,
RS-449/V.36, RS-530,
internal/external clocking
• 2X 10/100Base-T
Ethernet (RJ-45
connectors)
• 1 DSP connector per unit
•
• Auto-sensing power 100-
240 VAC, 50/60 Hz, 30 W
maximum
• 4/8 serial port (user or
link), DTE or DCE,
HD26F connector,
compatible with RS-
232/V.24, V.35,
X.21/V.11,
RS-449/V.36, RS-530,
internal/external clocking
• 1X 10/100Base-T
Ethernet (RJ-45
connectors)
Stand-alone base unit, 19”
rack mount
Stand-alone base unit, 19”
rack mount
Stand-alone base unit, 19”
rack mount
(height x width x
(89 x 427 x 310 mm)
(89 x 427 x 310mm)
(44 x 427 x 205 mm)
Environmental
Operating
0° to 45° C / 32° to 113° F 0° to 45° C / 32° to 113° F 0° to 45° C / 32° to 113° F
Storage
-20º to 65º Celsius / -4° to
-20º to 65º Celsius / -4° to
-20º to 65º Celsius / -4° to
0% to 95%, non-condensing
0% to 95%, non-condensing
0% to 95%, non-condensing
Software Option
SkyPerformer & TCP/IP
acceleration
SkyPerformer, TCP/IP
acceleration and ATM
Optional
Interfaces/Modules
telephony
• 2 and 4-port FXS and FXO modules with on-board DSP
(software controllable impedance, RJ-11 connector)
• 4-port E&M module with on-board DSP (2 or 4-wire, types
I, II, or V, 600 ohms, RJ-48 connectors)
•
4-wire Push to Talk (PTT) option available
• Single & dual port T1/E1 (software configurable, RJ-48
connectors, adapter cable required for BNC E1-75,
Data
• 2-port universal serial WAN interface (user or link), DTE
or DCE, HD26F connector, interface compatible
• with RS-232/V.24, V.35, 21/V.11, RS- 449/V.36, RS-530,
internal/external clocking
Not Applicable
Commentaires sur ces manuels