Comtech EF Data RAP-100 Spécifications télécharger pdf (Page 27)

ODU Operation RAP-100 Remote Access Panel

3–10 Rev. 1

3.2.33 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS) XREF(Ext Ref)

(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS) XREF(Ext Ref)

(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS) XREF(Ext Ref)

SELECT EXT REFERENCE:

YES NO (PRESS ENTER)

The user is prompted to select either YES or NO, using the LEFT/RIGHT arrow keys,

then to press ENTER. NOTE: The CSAT will automatically lock to an external 5 or 10

MHz reference independent of the state of this selection. This selection determines

whether or not the Summary Fault Relay is activated if the CSAT looses lock with the

external reference.

3.2.34 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS) REF-ADJUST

(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS) REF-ADJUST

(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS) REF-ADJUST

EDIT INT REF ADJUSTMENT: 087

(PRESS ENTER)

The user is prompted to edit the Internal 10MHz Reference setting using the UP/Down

arrow keys, then to press ENTER. The value will scroll between 000 and 255. NOTE:

The Internal Refernece is adjusted in the factory to be very accurate with the default

setting of 087. This parameter is made available to compensate for the long-term

frequency drift of the oscillator.

3.2.35 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS) RTC

(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS) RTC

(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS) RTC

SYNC ODU RTC TO LCL RTC

YES NO (PRESS ENTER)

The user is prompted to select either YES or NO, using the LEFT/RIGHT arrow keys,

then to press ENTER. Selecting YES will cause the CSAT RTC to be synchronized with

the Modems RTC.

3.2.36 (ODU,ENABLE,1:1,CSAT#1) INFO (Information)

(ODU,ENABLE,1:1,CSAT#2) INFO (Information)

(ODU,ENABLE,STAND-ALONE) INFO (Information)

INFO: MODEL TRANSMITTER

RECEIVER MISC LNA(ENTER)

The operator uses this menu item to select enter 1 of 5 ‘Information Windows’. Use the

LEFT/RIGHT arrow keys, then press ENTER.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Pas de commentaire

Comtech EF Data RAP-100 Spécifications Page 27