Comtech EF Data CDM-Qx Spécifications Page 217

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 258
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 216
CDM-Qx Satellite Modem Revision 4
Remote Control MN/CDMQx.IOM
C-27
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of arguments
Response
to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Internal
Redundancy
Mode
IRM= 5 bytes Command or Query
Redundancy mode
Syntax: IRM=x,abc
Where x:
0=No Redundancy
1=1:1 modem (back-up cards at slot#3 and slot#4), or
1:1 Tx (back-up Tx on slot#4), or
1:1 Rx (back-up Rx on slot#4)
2=1:2 Tx, or 1:2 Rx (back-up card on slot#4)
3=1:3 Tx, or 1:3 Rx (back-up card on slot#4)
4=Reserved
where abc:
000=no redundancy or 1:1 modem or 1:3 Tx or 1:3 Rx.
If a=1, slot#1 is selected as primary, otherwise it’s not.
If b=1, slot#2 is selected as primary, otherwise it’s not.
If c=1, slot#3 is selected as primary, otherwise it’s not.
Note: The settings on a,b, and c fields are only required if
Qx is in 1:1 Tx or 1:1 Rx or 1:2 Tx or 1:2 Rx .
Example: IRM =1,000 (1:1 modem)
IRM =1,010 (1:1 Tx or 1:1 Rx with primary at
slot#2.
IRM =
IRM?
IRM*
IRM#
IRM$
IRM^
IRM? IRM = x,abc
(see description of
arguments
Redundancy
Auto or Manual
Switching
RAM= 1 byte Command or Query.
0 = manual switching (default)
1 = automatic switching
RAM =
RAM?
RAM *
RAM #
RAM^
RAM? RAM=x
(see description of
arguments)
Vue de la page 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 257 258

Commentaires sur ces manuels

Pas de commentaire