Comtech-ef-data MIDAS Version 4.X Basic Configuration Manuel d'utilisateur Page 20
- Page / 164
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MIDAS 4.2 Basic Configuration, Rev. 1
1–6 Getting Started
If a failure is detected in the active Controller Server or the RF chain, the
backup Controller Server assumes the active role. If required, the operator can
command a switch-over manually.
Active and backup Controller Server(s) synchronize the databases on the LAN
over a dedicated circuit.
Optional 1:1 redundancy for the Network Control Modem or the LinkSync™
Modem is provided via Comtech EF Data's SMS-301 Redundancy Switch.
Within 20 milliseconds of a detection of a fault in the online modem, the
SMS-301 switches to the backup modem.
The SMS-301 switch must be configured as remote address 1 running at
19.2 kbit/s. Modem A and Modem B must have remote addresses 2 and 3,
respectively. Those modems must be configured at 9600 bit/s.
For detailed information on the SMS-301 switch, refer to the SMS-301
Redundancy Switch Installation and Operation Manual.
LAN
- MIDAS Version 4.X 3
- Network Customer Support 4
- Table of Contents 9
- Getting Started 10
- About this Manual 12
- Metric Conversion 12
- Trademarks 12
- Concerning this Manual 12
- Disclaimer 13
- Getting Started 1–1 15
- 1–2 Getting Started 16
- MIDAS System 17
- Components 17
- 1–4 Getting Started 18
- Standard MIDAS 19
- System Features 19
- Options 19
- 1–6 Getting Started 20
- 1–8 Getting Started 22
- Getting Started 1–9 23
- 1–10 Getting Started 24
- Getting Started 1–11 25
- 1–12 Getting Started 26
- Getting Started 1–13 27
- 1–14 Getting Started 28
- Getting Started 1–15 29
- 1–16 Getting Started 30
- About… window 31
- 1–18 Getting Started 32
- Getting Started 1–19 33
- 1–20 Getting Started 34
- 2–2 Setup and Operation 36
- Setup and Operation 2–3 37
- 2–4 Setup and Operation 38
- Setup and Operation 2–5 39
- 2–6 Setup and Operation 40
- Setup and Operation 2–7 41
- Power Setup 42
- AFC Setup 43
- Node Alignment 43
- 2–10 Setup and Operation 44
- 2–12 Setup and Operation 46
- 2–14 Setup and Operation 48
- Segment window 49
- Bandwidth Pool 50
- Major Bandwidth 51
- Pool Functions 51
- Adding Bandwidth 51
- Private Pools 52
- Deleting Bandwidth 53
- Space Segment 54
- Toolbar 54
- 2–22 Setup and Operation 56
- Grid Properties 58
- View Properties 59
- Legend Properties 59
- 2–26 Setup and Operation 60
- 2–28 Setup and Operation 62
- Control Channel 63
- Placement Selection 63
- Outbound 64
- Inbound 65
- Aloha Parameters 67
- 2–34 Setup and Operation 68
- 2–36 Setup and Operation 70
- 2–38 Setup and Operation 72
- 2–40 Setup and Operation 74
- 2–42 Setup and Operation 76
- 2–44 Setup and Operation 78
- 2–46 Setup and Operation 80
- AUPC Settings for 81
- CDM-550 81
- CDM-600, and 81
- CiM-550 81
- Data Modems 82
- 2–50 Setup and Operation 84
- 2–52 Setup and Operation 86
- 2–54 Setup and Operation 88
- 2–56 Setup and Operation 90
- Communications 92
- Settings 92
- 2–60 Setup and Operation 94
- 2–62 Setup and Operation 96
- Point to Multipoint 97
- Data Details 97
- 2–64 Setup and Operation 98
- 2–66 Setup and Operation 100
- Available Channels 101
- Assigned Channels 102
- 2–70 Setup and Operation 104
- 2–72 Setup and Operation 106
- Saving a Video 107
- Conference 107
- 2–74 Setup and Operation 108
- MIDAS Reports 3–1 109
- 3–2 MIDAS Reports 110
- MIDAS Reports 3–3 111
- 3–4 MIDAS Reports 112
- • Site • Hunt Group 113
- • Directory • Circuit 113
- 3–6 MIDAS Reports 114
- MIDAS Reports 3–7 115
- 3–8 MIDAS Reports 116
- MIDAS Reports 3–9 117
- 3–10 MIDAS Reports 118
- 3–12 MIDAS Reports 120
- 3–14 MIDAS Reports 122
- Retries for a 123
- Single Node 123
- 3–16 MIDAS Reports 124
- MIDAS Reports 3–17 125
- 3–18 MIDAS Reports 126
- MIDAS Reports 3–19 127
- 3–20 MIDAS Reports 128
- 4–2 Maintenance Menu 130
- 4–4 Maintenance Menu 132
- 4–6 Maintenance Menu 134
- (Hours:Minutes:Seconds) 135
- (Month/Day/Year) 135
- 3. Click [OK] 135
- 4–8 Maintenance Menu 136
- 4–10 Maintenance Menu 138
- 4–12 Maintenance Menu 140
- 4–14 Maintenance Menu 142
- 70 MHz IF 144
- Example of Ku 145
- Band Carrier 145
- A–4 Maintenance Menu 146
- A–6 Maintenance Menu 148
- A–8 Maintenance Menu 150
- Guard Band 151
- 3700-3702 C 3738-3740 151
- 1410-1412 L 1448-1450 151
- A–12 Maintenance Menu 154
- A–14 Maintenance Menu 156
- Errata A 157
- Errata B 158
- Errata C 159
- Filename: T_ERRATA 2 160
- Errata D 161
- METRIC CONVERSIONS 163
- Units of Length 163
- Temperature Conversions 163
- Units of Weight 163
- 480 • 333 • 2200 PHONE 164
- 480 • 333 • 2161 164
Produits connexes et manuels pour Équipement Comtech-ef-data MIDAS Version 4.X Basic Configuration
Équipement Comtech-ef-data Ku-Band Power Amplifier with Optional L-Band Manuel d'utilisateur
(34 pages)
(34 pages)
Équipement Comtech-ef-data SPOD PS 1, PS 1.5, and PS 2 C-, X-, or Ku-Band Manuel d'utilisateur
(194 pages)
(194 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.016 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels